| | |
|
| |
| | |
|
|
Carli Adjustable Pan Rod Bar 1994 - 2010 Dodge 2500/3500 4x4
|
List Price: $385.00
Your Price: $345.00
You Save: $40.00 (10 %)
Out of stock
Item Number: CS-PRB-03
Manufacturer: Carli Suspension
Manufacturer Part No: CS-PRB-03
Personalization
Add The Solid Steel Track Bar Conversion Bracket
|
The Carli Suspension Adjustable Pan Rod Bar is a must for any 1994 - 2010 Dodge Ram 2500 / 3500 4x4 with a lift.
The Carli Adjustable Track Bar will allow you to re-center the front axle due to its adjust-ability.
The Carli Suspension Adjustable Track bar also helps to insure proper suspension geometry.
The Adjustable Pan Rod Bar will also give a tighter feel to the front end by eliminating the O.E.M rubber bushings.
Performance Characteristics of the Carli Adjustable Track Bar:
-
Constructed with a 7/8" chromoly bearing on the axle side.
- A Delrin style Semi Rigid bushing on the frame side.
- Each Adjustable Track Bar is constructed of 11/2" X .250 wall Chromoly Tube to ensure maximum strength.
- TIG Welded in house by Carli Suspension
- CNC Bent for Perfect Fitment
- Powder Coated for maximum Corrosion Resistance
|
The Carli Adjustable Track Bar now Fits all of the Dodge Ram Models listed below:
- 2008 - 2010 For 16mm Axle End / 16mm Frame End
- 2007 - 2007.5 For 14mm Axle End / 16mm Frame End
- 2003 - 2006 For 14mm Axle End / 14mm Frame End
- 1994 - 2002 Requires Conversion Bracket
NOTE: The 1994 - 2002 Dodge Ram trucks require the installation of the Solid Steel Industries Track Bar Conversion Bracket - TBK2029402-4
to mount a 3rd Gen Style Bar on a 2nd Gen Truck.
The Dodge mounting point on the frame is thin wall steel and uses a
14mm bolt.
That is why Carli Suspension does not incorporate bearings
on both ends.
By not using a bearing on both ends, there is a safety
zone for additional give under extreme conditions, which will not only
egg out your bolt hole, it could shear the bolt off entirely.
|
List Price: $385.00
Your Price: $340.00
You Save: $45.00 (12 %)
The Solid Steel Industries DAT30203-4 - 3rd Gen. Dodge Adjustable Track Bar - 2003 - 2007.5. Just install the bar and turn the adjusting sleeve till the axle is centered, it's that simple.
|
List Price: $259.00
Your Price: $185.00
You Save: $74.00 (29 %)
Solid Steel Industries - TBK2029402-4 Track Bar Conversion Kit for Dodge RAM 94-02, 2500 and 3500. This Solid Steel Industries Track Bar Retrofit Kit will allow you to utilize a 2003 and up factory Dodge Track Bar on your '94 to '02 Dodge RAM pickup.
|
List Price: $1,255.00
Your Price: $1,100.00
You Save: $155.00 (12 %)
The Carli Suspension Dodge Ram Front End Upgrade Kit - Fits 2003 - 2010 Ram 2500/3500 4X4 and the 2006 - 2010 1500 Mega Cab. This Kit includes - 4130 Adjustable Track Bar, High Mount Steering Stabilizer and the Extreme Duty Upper Ball Joints.
|
List Price: $625.00
Your Price: $450.00
You Save: $175.00 (28 %)
The Carli Suspension Extreme Duty Upper Ball Joints are available for the 2003 to 2010 Dodge Ram 2500/3500 4X4 and the 2006 to 2009 Ram 1500 Megacab. These new Carli Heavy Duty Upper Ball Joints offer 3 times the life expectancy of the O.E.M. joint.
|
List Price: $900.00
Your Price: $800.00
You Save: $100.00 (11 %)
Carli Suspension Extreme Duty Ball Joint Kit - For the 2003 to 2010 Dodge Ram 2500/3500 4X4 and the 2003 to 2010 Ram 1500 Megacab. These new Carli Heavy Duty Dodge Ram Replacement Ball Joints are the last ball joints you will ever put in your Dodge Ram.
|
The Carli Suspension Extreme Duty Upper Lower Joints are available for the 2003 to 2010 Dodge Ram 2500/3500 4X4 and the 2006 to 2009 Ram 1500 Megacab. These new Carli Heavy Lower Upper Ball Joints CS-DLBJ are guaranteed for as long as you own it.
|
Product Reviews
|
|
|