Carli Suspension Dodge Adjustable Track Bar - Pan Rod Bar

Carli Suspension now has a New Model Dodge Ram Adjustable Chromoly Track Bar the CS-PRB-03 which works on all Dodge Ram Trucks from 1994 to 2010.

The Carli Adjustable Track Bar will re-center the axle side to side and ensure the proper suspension geometry.

The Carli Suspension Adjustable Chromoly Track Bar works on the following Dodge Ram models.

• 2006 - 2010 Dodge Ram 1500 Megacab 4X4s.
• 2003 – 2010 Dodge Ram 2500 /3500 4x4s
• 1994 - 2002 Dodge Ram 2500 /3500 4x4s with the addition of a Solid Steel Track Bar Relocation bracket.
  

This Adjustable Carli track bar will also give a tighter feel to the front end by eliminating the O.E.M rubber bushings.

The Dodge mounting points for the track bar are thin wall steel on the frame and use a 14mm bolt. This is why the Carli Adjustable track bar does not use bearings on both ends. By not using a bearing on both ends, there is a safety zone for additional give under extreme conditions.  This extra insurance helps to prevent the frame side bolt from egging out the mounting point or even worse shearing the bolt off completely.

The Carli Adjustable Track Bar is built to the following specializations:

• CNC bent for perfect fitment
• TIG-welded in house
• Constructed from 1.50" x .250" wall Chromoly tube for maximum strength
• 7/8"  bearing is used on the axle side
• A Semi-rigid Delrin urethane bushing is used on frame side

Dodge Ram Fitment Guide for the Carli Suspension Adjustable Pan Rod Bar

•  2008 For 16mm Axle End / 16mm Frame End
•  2007 - 2007.5 For 14mm Axle End / 16mm Frame End
•  2003 - 2006 For 14mm Axle End / 14mm Frame End
• 1994 - 2002 Requires the use of a Solid Steel Track Bar Relocation Bracket
• The Carli Adjustable Track Bar is Powder Coated for Maximum Corrosion Resistance