| | |
|
| |
| | |
|
|
Carli Dodge Ram Hydropneumatic Front Bumpstops
|
List Price: $850.00
Your Price: $750.00
You Save: $100.00 (12 %)
IN STOCK AND READY TO SHIP
Item Number: CS-FHB-1
Manufacturer: Carli Suspension
Manufacturer Part No: CS-FHB-1
|
KLM Performance Inc. is proud to distribute the Carli Suspension Dodge Ram Hydro Pneumatic Front Bump Stops
The Carli Suspension Dodge Ram Hydro Pneumatic
Front Bump Stops work on the following Dodge Rams
- 2003 - 2010 2500 / 3500 4X4
- 2006 - 2010 1500 Megacab 4X4
Carli Suspension was the first company to design and produce a front Hydroneumatic Bump Stop for the Dodge Ram pickups. The Carli front bump stop kit does not reduce wheel travel. The Hydroneumatic Bump Stop for the Dodge Ram
Only is only utilized in the final 2.5 of travel. The bump stops there fore act as a secondary suspension system. This Hydroneumatic Bump Stop for the Dodge Ram was designed to protect your truck from those unforeseen hits when pushing the limits of the suspension. All of the energy used to compress the bump stop is dissipated as heat thus preventing the suspension from bottoming out, leaving everything still in place on your dash.
Also, the rebound of the bump stop is designed to extend at a slower rate which will keep from forcing the axle back down, which would cause the suspension to bounce back. By slowing down the last couple of inches of compression travel, you reduce the amount of stored energy that needs to be controlled on the rebound side. This will help maintain control of the vehicle when off-roading at speed.
Bump stops can be utilized in conjunction with any of Carli suspensions systems, or even stock applications.
Minor welding is needed for installation. Since the Dodge Ram Truck is based on a hydroformed frame type, which should not be welded on. The bottom of the coil buckets are the anchor for the bump stop rest, which is welded.
The Carli Suspension Dodge Ram hydo-pneumatic bump stops offer "position sensitive" high-speed
compression dampening. When you take a big hit and stroke the shock piston
through the travel and the bump stop engages, it dramatically increases the
compression dampening in the last 2.5 inches of travel, offering substantial
bottom out protection. Low speed dampening is unaffected, and here's why; you
can compress the bump stop slowly to full up travel. The bump stops are designed
with low flow pistons and are valved (tuned) to absorb high shaft speed
impacts, yet still allowing the axle to articulate slowly to full bump without
resting on a fully extended bump stop.
"A world of difference in the dirt and insurance against a 'gotcha'
when the time comes."
|
|
List Price: $695.00
Your Price: $565.00
You Save: $130.00 (19 %)
The Carli Suspension Torsion Sway Bar CS-TSB 2003 - 2010 Dodge Ram 1500 Megacab 2500/3500 4x4. The Carli Torsion Sway Bar is the single biggest way to improve the ride quality of the Dodge Ram suspension.
|
List Price: $900.00
Your Price: $800.00
You Save: $100.00 (11 %)
Carli Suspension Extreme Duty Ball Joint Kit - For the 2003 to 2010 Dodge Ram 2500/3500 4X4 and the 2003 to 2010 Ram 1500 Megacab. These new Carli Heavy Duty Dodge Ram Replacement Ball Joints are the last ball joints you will ever put in your Dodge Ram.
|
Product Reviews
|
|
|