| | |
|
| |
| | |
|
|
Carli Torsion Sway Bar 2003 - 2010 Dodge
|
List Price: $695.00
Your Price: $565.00
You Save: $130.00 (19 %)
Out of stock
Item Number: CS-TSB
Manufacturer: Carli Suspension
Manufacturer Part No: CS-TSB
|
KLM Performance is proud to carry the CS-TSB Carli Torsion Sway Bar for the Dodge Ram Pickups.
The CS-TSB Carli Torsion Sway Bar works on the following Dodge Ram Pickup models.
- 2003 - 2010 Dodge Ram 2500/3500 4X4
- 2003 - 2010 Dodge Ram 1500 Mega Cabs 4X4
The Carli Torsion Sway Bar is the single biggest improvement of ride quality out of the entire line
of the Carli Dodge Ram Components. The Dodge Ram pickup trucks have a front sway bar's with a torsion rate that is extremely
high.
This extremely high torsion rate almost marries the front axle to the chassis. This high torsion rate of the OEM Sway bar is most evident when you encounter low speed offset bumps, such as crossing speed bumps
one tire at a time and entering or exiting a driveway at an angle where
you feel an abrupt side to side rocking of the entire rig.
There are several added benefits felt when you install the Carli Torsion Sway Bar.
The first
major improvement you will feel with Carli Torsion Sway Bar installed is a "detached" feel of the axle
and chassis. By producing a Front Sway Bar with a lower torsion rate the axle and chassis are allowed to work independently of each
other without undo movement. The Carli Torsion Sway Bar allows your axle to move the way it was designed to.
The second benefit is improved performance you will notice when you traveling at high rates of speed. The Carli Torsion Sway Bar High offers speed performance that is greatly improved over the OEM Sway bar. Allowing you instantly feel that
the back end of the truck comes around much better when you drive out of the corners under power.
The third benefit is the feeling of flatter cornering while allowing the suspension to increase its articulation from the now unhindered movement offered by the installation of the Carli Lower Torsion Sway Bar. If you had noticed a harsh feeling of response in the front under low speeds, Imagine what it feels like when higher speeds are encountered. The OEM sway bar gives the truck a lazy feel in corners while you still
experience body roll.
The Carli Torsion Sway Bar with its lighter torsion rate and adjustable arm
design allow the high speed cornering of your Dodge Ram to be a natural
cycle of weight exchange followed by the suspension "setting" in the
corner and fully function as it was designed to do. The Carli Torsion Sway Bar was designed to handle everything from Rock Crawling to High Speed Drifting in the bumps will allowing Dodge Ram Suspension Full Sway Control on the City Streets.
Specifications of the Carli Torsion Sway Bar
- Increases Articulation by 25% over the OEM Sway Bar
- Constructed with 4130 Chromoly Construction
- 2-Stage Torsion Adjustment allows you adjust rates based on conditions.
- Easy Maintenance
- Simple and Easy Installation
- Bolts On In Minutes
Let the front axle move, the way it was designed to by installing the Carli Torsion Sway Bar.
|
|
List Price: $385.00
Sale Price: $306.00
You Save: $79.00 (21 %)
The Solid Steel Industries DAT30203-4 - 3rd Gen. Dodge Adjustable Track Bar - 2003 - 2007.5. Just install the bar and turn the adjusting sleeve till the axle is centered, it's that simple.
|
List Price: $255.00
Sale Price: $211.50
You Save: $43.50 (17 %)
Solid Steel Industries - Dodge Steering Stabilizer - DSS00203-4 - Dodge RAM 2003 - 2008 2500, 3500 4X4. The Solid Steel Industries DSS, also known as the "Darins' Steering Stabilizer" is designed to eliminate steering wander in the Dodge Ram pickups.
|
List Price: $375.00
Sale Price: $310.50
You Save: $64.50 (17 %)
Carli Suspension Adjustable Pan Rod Bar - Track Bar fits the 1994 - 2009 Dodge 2500/3500 4x4 and the 2006 - 2009 Dodge Ram 1500 Megacab 4X4s. The installation of the Solid Steel TBK will allow you to mount the Carli Track Bar on your 94 - 02 Dodge Ram.
|
List Price: $292.00
Your Price: $241.65
You Save: $50.35 (17 %)
000951 BORGESON STEERING SHAFT, 951 - Will fit the 2003 - 2009 Dodge Ram 2500/3500 4WD and the 2006 - 2009 Ram 1500 4WD Mega Cab. The Borgeson 951 replacement Steering Shaft is the answer to removing the play in the steering.
|
List Price: $625.00
Your Price: $450.00
You Save: $175.00 (28 %)
The Carli Suspension Extreme Duty Upper Ball Joints are available for the 2003 to 2010 Dodge Ram 2500/3500 4X4 and the 2006 to 2009 Ram 1500 Megacab. These new Carli Heavy Duty Upper Ball Joints offer 3 times the life expectancy of the O.E.M. joint.
|
List Price: $900.00
Your Price: $800.00
You Save: $100.00 (11 %)
Carli Suspension Extreme Duty Ball Joint Kit - For the 2003 to 2010 Dodge Ram 2500/3500 4X4 and the 2003 to 2010 Ram 1500 Megacab. These new Carli Heavy Duty Dodge Ram Replacement Ball Joints are the last ball joints you will ever put in your Dodge Ram.
|
Product Reviews
| (2 Ratings, 0 Reviews) |
Average Rating:
|
|
|
|