| | |
|
| |
| | |
|
|
DYNATRAC Ford Super Duty Combo Kit - 1999-2004 Ford F-250 and F-350 Trucks
|
|
List Price: $3,395.00
Your Price: $3,345.00
You Save: $50.00 (1 %)
IN STOCK AND READY TO SHIP
Item Number: FO60-2X1104-A
Manufacturer: Dynatrac
Manufacturer Part No: FO60-2X1104-A
IN STOCK AND READY TO SHIP!
Personalization
* denotes required field
Does your vehicle have ABS?*
Vehicle Year*
Vehicle Model*
Vehicle Lift*
Wheel Stud Size*
Add Dana 60 U-Joits (pair)*
Add Dynaloc Locking Hubs*
|
DYNATRAC Ford Super Duty Combo Kit - 1999-2004 Ford F-250 and F-350 TrucksThe Dynatrac Ford Super Duty Combo Kit addresses two major problems with 1999-2004 Ford F-250 and F-350 trucks.
The DYNATRAC Ford Super Duty Combo Kit - 1999-2004 Ford F-250 and F-350 Trucks replaces the OEM live spindle/hub assembly with a Dynatrac Free-Spin Heavy-Duty Hub Conversion Kit with a Dana 70 fixed-spindle designed for the loads and stresses of large tires and heavy trucks. Also included in the kit is a complete Crossover Steering Kit that markedly improves the responsiveness and precision of the truck's steering.
Ford Super Duty owners with lifted trucks and bigger tires suffer from rapid front wheel bearing failure. The OEM, non-serviceable “live” spindle (a.k.a. unit bearing) is extremely expensive to replace, and will not stand up to big tires. The Dynatrac Ford Super Duty Combo kit includes Dynatrac's Pro 60 knuckles and hubs in a fixed spindle design, which is specially set up for the loads created by big tires. Each wheel also receives a 35-spline outer axle shaft instead of the stock, 30-spline shaft and a Premium Warn manual locking hub to replace the factory units. This bearing failure problem is all to common and this issue is resolved when you install a DYNATRAC Ford Super Duty Combo Kit.
The Dynatrac Ford Super Duty Combo Kit offers improved handling and increased ground clearance with a unique Crossover Steering Package that locates the steering linkage up and away from rocks and ground obstacles while improving linkage geometry. Dynatrac's Crossover steering also minimizes bump steer, common in lifted suspensions. The package even includes an impressive, fabricated, dual-opposed steering stabilizer that is located above the beefy 1.5” diameter tie-rod assembly.
DYNATRAC Ford Super Duty Combo Kit - 1999-2004 Ford F-250 and F-350 Trucks
The DYNATRAC Ford Super Duty Combo Kit works on the following vehicles.
-
1999- 2004 Ford F-250 4X4
-
1999 - 2004 Ford F-350 4X4
-
1994 - 2004 Ford Excursions
Each Dynatrac Ford Super Duty Combo Kit also includes a much longer, fully adjustable, and massive track bar compared to the tiny stock track bar. The reduced operating angles of the Dynatrac track bar eliminate binding in the leaf spring bushings and free up suspension movement that gives double the wheel travel of lifted suspensions without the Dynatrac kit.
Dynatrac Super Duty Combo Kits are immediately available and are compatible with all Ford Super Duty 4x4 trucks and Excursions fitted with popular suspension kits ranging between 6-12” of lift. The Dynatrac Super Duty Combo kit will also work on 99 to '04 Ford vehicles equipped with either the Dana 50 or Dana 60 front axle. This is a 100% bolt-on kit with no welding or drilling required. See our Free-Spin kits for trucks sporting stock suspensions and other ranges of lift.
For those Ford Super Duty owners without lift kits or large tires but looking for the same reliability and ease of maintenance benefits of the Dynatrac Ford Super Duty Combo Kit see our Dynatrac Free-Spin Heavy Duty Front Hub Conversion Kits for Ford Super Dutys
Benefits of the Dynatrac Ford Super Duty Combo Kit:
• Greater strength & lower maintenance costs
• Improved handling & control
• Increased suspension travel
• Higher ground-clearance
• Uses standard truck wheel bearings and seals commonly available at any auto parts store
• Sharper turning radius & smoother ride
The Dynatrac Ford Super Duty Combo Kit includes the following systems:
Free-Spin Heavy-Duty Combo Hub Conversion Includes:
* Pro 60 steering knuckles with new ball joints installed
* Pro 60 spindles (fixed spindle design)
* Pro 60 8 on 170 mm wheel hubs
* Pro 60 35-spline 1.5" dia. outer axle shafts (stock are 30-spline)
* 35-spline Warn Premium manual locking hubs
* User Serviceable wheel bearings, races, and seals
The Dynatrac Ford Super Duty Combo Kit includes a Complete Crossover Steering Package:
* New adjustable Track bar with urethane bushings
* New Track bar brackets at the frame and at the axle
* Billet RH steering arm
* Tie-rod assembly (1.5" dia. x 3/8" wall) including greasable rod ends
* Drag link assembly (1.25" dia. x 5/16" wall) including greasable rod ends
* New, custom dual-opposed steering stabilizer kit including shocks
* Includes all additional small parts, brackets and hardware
|
DYNATRAC Ford Super Duty Combo Kit - 1999-2004 Ford F-250 and F-350 Trucks
Additional InformationDynatrac Hub Conversion Kit Information on KLMperformance.com |
Product Reviews
|
|
|