| | |
|
| |
| | |
|
|
FASS STK-1001 1/2" Suction Tube Kit
|
|
List Price: $39.00
Your Price: $37.00
You Save: $2.00 (5 %)
REPLACED WITH THE FASS STK-1002 SUCTION TUBE KIT
Item Number: FASS STK-1001
Manufacturer: FASS
Manufacturer Part No: FASS STK-1001
|
FASS STK-1001 | 1/2" Suction Tube KitThe FASS STK-1001 is no longer available and has been replaced with the FASS STK-1002 Suction Tube Kit.
The FASS STK-1001 1/2' Fuel Suction Tube Kit is used to by pass in-tank pumps and works with all of the FASS Fuel Systems.
The FASS STK-1001 1/2' Fuel Suction Tube Kit is a vital component to insure you get the maximum fuel flow from your FASS Fuel System.
In order to get the best performance from your FASS System you need to have an adequate supply of fuel from the fuel tank.
FASS Systems that are hooked up directly to the OEM fuel port on top of tank will have a reduced flow of fuel.
Any FASS System that is designed to move high volumes of fuel needs to have the FASS STK-1001 Suction Tube Kit installed with the system.
The FASS STK-1001 1/2" suction tube kits allows the fuel to be picked up at a point in the fuel tank with virtually no restriction in flow and minimal friction loss.
The FASS STK-1001 1/2" Suction Tube kit allows all of the FASS Pumps to function at there highest potential flow rates.
By installing the FASS STK-1001 1/2" Suction Tube Kit in the tank you are insuring that your FASS System will get the maximum flow of fuel starting at the tank.
The addition of the FASS STK-1001 1/2" Suction Tube Kit will help to reduce any potential friction loss allowing for the maximum flow of fuel to any FASS pump and the entire fuel delivery system.
The installation of the FASS STK-1001 is used to by pass the OEM fuel pickup points in your trucks fuel tank.
The FASS STK-1001 1/2" Suction Tube Kit is installed by drilling a hole in the top of your tank to install the pick up.
The stock pump will be unplugged when you plug in the FASS harness up at the engine.
The FASS STK-1001 Fuel Pickup Tube Kit includes:
* 3/8” Bulkhead - # BHF-1001
* Grommet - # RS2770
* 3/8” MPT Suction 12’1/4” Length Suction Tube - # ST-1001
* 3/8” MPT (Male Pipe Thread) x 1/2” Flare (90 Degree) - # 10-299
* 3/8” x 1/2”Female Push Lock - # PL-1002
* 1/2” x 1/2” Female Push Lock - # PL-1005
The FASS STK-1001 1/2" Suction Tube Kit is approved for use in the following diesel powdered vehicles:
* 1994 - 2011 Dodge Ram Cummins - 5.9L / 6.7L - 2WD and 4WD trucks
* 1999 - 2011 Ford Powerstroke - 7.3L / 6.0L / 6.4L - 2Wd and 4WD trucks
* 2001 - 2011 GM Duramax - 6.6L - 2WD and 4WD trucks
The installation of the FASS STK-1001 is used to by pass the OEM fuel pickup points in the tank.
The FASS STK-1001 will not interfere with the OEM vehicles Fuel Gauge.
The FASS Pump will not draw through the intank pump.
So you will need to install a Suction Tube Kit. (STK-1001)
The FASS STK-1001 Suction tube kits allows the fuel to be picked up at a point in the fuel tank with virtually no restriction in flow and minimal friction loss. T
he FASS STK-1001 1/2" Fuel Pickup Tube Kit allows the FASS Pump to function at its highest potential flow rates.
Because of the higher fuel flow these systems have to offer, you may encounter stock fuel module problems. By installing the FASS STK-1001 will solve these problems.
The FASS STK-1001 is installed by drilling a hole in the top of your tank to install the pick up.
You just leave the pump in the tank and don't mess with it. It will be unplugged when you plug in the FASS harness up at the engine.
NOTE: The FASS STK-1001 Kit is Included in all FASS Systems for the 2005 and newer Dodge Ram trucks!
FASS STK-1001 Suction Tube Kit
|
List Price: $69.00
Your Price: $66.00
You Save: $3.00 (4 %)
The FASS IL-1001 Indicator Light Kit will monitor fuel pressure and if system pressure drops below 7 PSI and in-cab light will illuminate to indicate a problem with the fuel system.
|
List Price: $69.00
Your Price: $65.55
You Save: $3.45 (5 %)
FASS STK-1002 5/8" Suction Tube Kit 94-12 Ram, 01-12 GM, 99-12 FSD The addition of the FASS STK-1002 will help to reduce any potential friction loss allowing for the maximum flow of fuel to any FASS pump and the entire fuel delivery system.
|
|
|
List Price: $44.00
Your Price: $41.80
You Save: $2.20 (5 %)
The FASS 150 Replacement Filter Set. This FASS Replacement Filter Set is for FASS 150 Series Pumps. This FASS 150 Filter set contains the FF-1010 Fuel Filter (10 Micron) / FS-1001 Water Separator (20 Micron) - FASS Replacement Filters - FASS 150 Series
|
List Price: $39.90
Your Price: $38.00
You Save: $1.90 (5 %)
FASS 95 Series / Titanium Series Replacement Filter Set: FF-2003 Fuel Filter (3 Micron) WS-2001 Water Separator (144 Micron) KLM Performance recommends you keep a spare set of FASS 95 Series Replacement Filters with you at all times in your truck.
| |
Product Reviews
|
|
|