| | |
|
| |
| | |
|
|
MADS Electronics SMARTY S-67 & SMARTY S-67 ME
|
|
List Price: $715.00
Your Price: $685.00
You Save: $30.00 (4 %)
IN STOCK AND READY TO SHIP
Item Number: SMARTY S-67
Manufacturer: MADS Electronics
Manufacturer Part No: SMARTY S-67
Personalization
* denotes required field
Specify the Year of Your Truck*
SMARTY S-67 Software Choices *
DELIVERY OPTION*
|
KLM is proud to be a distributor of MADS Electronics products and in particular the MADS Electronics SMARTY S-67 power module now loaded with the Latest Mads Electronics REVO SOFTWARE.
KLM Performance offers FREE NEXT DAY SHIPPING on all MADS ELECTRONICS SMARTY products.
The MADS Electronics SMARTY S-67 programmer for the 6.7L allows you to unlock the true potential of the Cummins 6.7L motor.
The MADS Electronics SMARTY S-67 programmer for the 6.7L allows Code Free operation of the Cummins 6.7L motor.
The MADS Electronics SMARTY S-67 is now available for the following Cummins powdered Dodge Ram trucks:
- SMARTY S-67 for the 2007.5 Dodge Cummins Turbo Diesel 6.7L
- SMARTY S-67 for the 2008 Dodge Cummins Turbo Diesel 6.7L
- SMARTY S-67 for the 2009 Dodge Cummins Turbo Diesel 6.7L
The MADS Electronics SMARTY S-67 in now available with two different tunes.
- The S-67 comes loaded with the standard REVO software for operation WITH the diesel particulate filter in place.
- The S-67 loaded with the REVO-ME software for operation WITHOUT the diesel particulate filter in place is available as a Free Download from the MADS Electronics Website.
Each performance enhancer in the Smarty line gives you the ability to choose several levels of increased power or reduced fuel consumption, according to your current driving needs.
The benefits of the MADS Electronics SMARTY S-67 are:
* SMARTY S-67 has Ten different CaTCHER performance software modules for each truck.
* SMARTY S-67 allows ABS / Speedo recalibration in steps of one tenth of an inch.
* SMARTY S-67 has a code reader, codes are displayed as Pxxxx and in plain English.
* SMARTY S-67 has the fastest download, up to three times faster than the competition.
* SMARTY S-67 has a built-in USB port for Internet updates.
The SMARTY software updates are available as a free download from the MADS Electronics website.
Horsepower Settings For The MADS Electronics SMARTY S-67
The horsepower settings.
except #0, all other software applications have a modified "Torque management" (
TQM).
The throttle response is greatly improved but is set to a save limit.
With
"Save" they mean save your transmission and rest of the drive line.
* SW# 0: Half power
* SW# 1: 30 Hp increase, with added timing - RAISED TIMING
* SW# 2: 60 Hp increase, no added timing - STOCK TIMING - SOFT CaTCHER
* SW# 3: 60 Hp increase, with added timing - RAISED TIMING
* SW# 4: 90 Hp increase, no added timing - STOCK TIMING - MILD CaTCHER
* SW# 5: 90 Hp increase, with added timing - RAISED TIMING
* SW# 6: 130 Hp increase, no added timing - STOCK TIMING - CaTCHER
* SW# 7: 130 Hp increase, with added timing - RAISED TIMING
* SW# 8: 170 Hp increase, no added timing*** - STOCK TIMING - WILD CaTCHER
* SW# 9: 170 Hp increase, with added timing*** RAISED TIMING - WILD CaTCHER
Software number Zero,
About half the power of a stock software. Use it whenever reduced power is desired or when you
have to make sure that NO SMOKE is produced .
Software number One,
30 Horsepower increase with additional timing.
Software number Two,
***60 horsepower increase without additional timing.
Software number Three ,
60 horsepower increase with addidtional timing.
(Highest save level for a stock automatic transmission)
Software number Four,
***90 Horsepower increase without additional timing.
Software number Five,
90 Horsepower increase with additional timing.
( Highest save level for a stock clutch / Manual transmission)
Software number Six ,
***130 Horsepower increase without additional timing.
Software number Seven ,
130 Horsepower increase with additional timing.
°°°Software number Eight,
***170 Horsepower increase without additional timing.
°°°Software number Nine ,
170 Horsepower increase with additional timing.
°°° Do not use for prolonged high speed runs! Speeds exceeding approx 105Mph can result in high
exhaust gas temperatures and damage the Diesel Particulate Filter (DPF) !!!
*** All even numbered software's ( 2-4-6-8 ) without added timing are to be used for stacking with
other after market power adding devices that also add their own timing. NO additional timing has to
be used with the odd numbered software's ( 1-3-5-7-9 )! Severe engine damage will result!!!!
***Do not use for prolonged high speed runs! Speeds exceeding approx
105 mph can result in high exhaust gas temperatures and damage the Diesel Particulate Filter (DPF) !!!
.
All even numbered software
(2-4-6-8) without timing are to be used for stacking with other after market
power adding devices that also add their own timing.
NO additional timing has
to be used with the odd numbered software (1-3-5-7-9). Severe engine damage
will result !!!
Tested on stock trucks on a Mustang Dyno. Stock means just that. Stock. Even the air filters were stock. The 03 produced 130 HP more @ 30 PSI of boost while the 04.5 produced 170 HP more @ 40 PSI. We checked the "baseline" (the stock truck HP at the rear wheels) twice in a day in order to be sure about our findings.
The above declared HP numbers are all rounded down to the closest number. For example the 90 HP file actually did 96 HP. That's a 90 Hp software to us, not 100. The 170 HP was 174. The power gains with the 03's-04's would be actually higher if we started from a 235 HP engine.
Smarty is the FIRST AND ONLY down loader that does not erase any of the stored data in the ECM. Smarty does NOT leave any electronic footprints in the ECM or any other electronic module in the truck. Smarty does NOT set ANY codes once the ECM is set back to stock. Smarty does NOT need to have fuses pulled.
The MADS Electronics SMARTY S-67Smarty is not guaranteed to be undetectable - BUYER BEWARE.
ABS / Speedo Recalibration
The tire height can be adjusted up to 44" in increments of 10 tenth of an inch in just a couple seconds. Of course, Smarty needs to be VIN# locked to the truck in order to get into the ABS adjustment section.
DTC Code Reader
The name says it all. You can read and erase codes. Codes are displayed also in plain English. That's old news by now. The VP Smarty was the first one to provide that utility, others found the idea to be a good one too. Smarty does erase ABS codes too but does not display them.
ECM Update Speed
Faster than anything else on the market. Again, we've done our homework on the protocol. Depending upon the year of the truck, it takes from about three minutes to about five and a half. Three times faster than competitors.
Updates
If you have followed the Smarty for the VP trucks, then you've noticed that MADS has released several updates for it in a relatively short time. Well, you can expect the same to happen for the CR. The CaTCHER software modules as they are today are only a starting point.
NOTE: FEDEX requires a signature for the delivery of these packages.
Please list a shipping address where someone can sign for the delivery if you are not going to be home on the day of the delivery.
|
The MADS Electronics SMARTY PROGRAMMER S-67 is for the CUMMINS 6.7 Diesel is not untraceable.
NOTE:
SMARTY S-67 REVO-ME program cannot be used on vehicles
that have the diesel particulate filter in place.
The MADS Electronics SMARTY S-67 REVO-ME program which
automatically turns off the DPF regeneration function and the
EGR (Exhaust Gas Recirculation).
The
REVO-ME also removes the 4th late fuel injection events helping to
increase your fuel economy.
The MADS
Electronics SMARTY S-67 REVO-ME programming does not require the use of
exhaust thermocouples or simulators.
The MADS
Electronics ME Software is solely intended for off-road use only.
Additional InformationMads Electronics Smarty Boxes
Fast guide to Smarty’s special Features
* CaTCHER software's inside
* Ten different performance levels - Half Power to 170HP
* Fastest download in the industry, up to three times faster than
the competition, a typical ECM update takes about 5 minutes
* ABS tire height updates in just few seconds
* Manual High Idle is enabled in all softwares
* Reads Diagnostic Trouble Codes in plain text and clears codes
* No tools required, no fuses to pull
* USB built in for simple updates
* Free internet updates
* Most complete keyboard in the industry
* Reliable, it works off your OEM hardware
* Programmable Speed Limiter from 25 to 250 mph
* Programmable parameters for fine tuning
* "On the fly" Power on Demand under development
* TNT softwares under advanced development
*** Unlike the Smarty S06 for the 5.9L, the Smarty S-67 is not untraceable - BUYER BEWARE
KLM Performance Inc. assumes no responsibility for claims, warranty issues or legal implications arising from the use of this product - Buyer Beware
MADS Electronics SMARTY S-67 & SMARTY S-67 ME
|
List Price: $1,245.00
Your Price: $1,100.00
You Save: $145.00 (12 %)
H&S Performance Stage 1 Dodge Code Free Race DPF Delete Kits - Part # XRT-27113
|
List Price: $249.00
Your Price: $236.55
You Save: $12.45 (5 %)
KLM Performance has the H&S Performance 835NB 6.7L DPF Delete Pipe in stock and ready to ship for the Dodge 2500 & 3500 Dodge Ram Pickups.
|
List Price: $225.00
Your Price: $213.75
You Save: $11.25 (5 %)
KLM Performance has the H&S Performance 27113 6.7L DPF Delete Pipe in stock and ready to ship for the 2007.5 - 20008 Dodge 2500 &3500 pickup models only. H&S Performance 6.7L DPF Delete Kit 27113 will not work on the Cab & Chassis models.
| |
Product Reviews
|
|
|