Solid Steel Industries - Dodge Steering Stabilizer - Dodge RAM 2003+ 2500, 3500 4X4

The DSS, also known as the "Darins' Steering Stabilizer" is designed to eliminate steering wander in the Dodge Ram pickups. It does this by adding an additional bearing to the bottom of the steering box sector shaft and by adding an additional cross member tying the frame rails together eliminating frame flex. In other words, takes the slop out of your steering.

The popular "DSS" steering stabilizer will greatly reduce steering "wander" on your late model Dodge pickup. This unit will serve to eliminate sector shaft play in the steering box which is a large contributor to wandering and poor road feel. It also serves to minimize frame flex at the steering box mounting point. First check all your steering components. Loose ball joints, tie-rod ends or trackbar obviously must be replaced. Poor wheel alignment must also be corrected. A steering box that has a loose sector shaft is often an overlooked cause of poor steering. Features of Solid Steel Steering Stabilizer: - Straight bolt-on installation. No drilling or welding. - All mounting hardware is supplied. - Durable powder-coated finish. - NTN bearing is easily replaced if necessary. Compatible with most lift kits. There are some exceptions, however. If your lift kit has drop brackets for the anti-sway bar AND there is a tube between these brackets, then there will be interference. Two models available to fits the following Dodge RAM Trucks: SSI DSS00203-4 - Dodge RAM 2003 and up, Dodge RAM 2500, and Dodge RAM 3500 4x4 SSI DSS0019402-4 - 1994 to 2002 Dodge RAM 2500 and Dodge RAM 3500 4x4 NOTE: KLM Performance cannot guarantee fitment of the Solid Steel Products on vehicles equipped with Snow Plows

Additional Information

Solid Steel Industries