TOTAL CHAOS 87500H 2007+ Toyota Tundra U.C.A

TOTAL CHAOS 87500H | Upper Control Arms | 2007 Toyota Tundra

Total Chaos now offers the 87500H Upper Control Arm with Heim Joints. The Total Chaos 87500H is the replacement Upper Control Arm system for your 2007+ Toyota Tundra pickup that upgrades the factory ball joint to a 1" Uniball and maintains a 100% bolt on application. When aftermarket lifts are installed on these model vehicles the OEM suspension design looses caster. By altering the factory caster, the vehicle will lose on road handling & performance and has a tendency to wander when driving down the road. Total Chaos developed the Upper Control Arms to add caster to the suspension when aftermarket coil over shocks and other lifts are installed. By Installing the Total Chaos 80501H arms you will Increases overall handling capabilities and aids in the alignment of the vehicle.

The Total Chaos 87500H Upper Control Arms offer the the following benefits:

    * The 87500H arms are built using all Chromoly tubing and 1" Teflon lined Uniballs,
    * These 87500H stock length upper control arms simply bolt to the existing factory a-arm location and pivot on urethane bushings.
    * Total Chaos has manufactured the 87500H Upper Control Arms with a press in spindle adapter that uses a 9/16" grade 8 bolt.
    * The 87500H kit includes heat treated hi-misalignment spacers and zinc plated end washers. Zerk fittings are included in all pivots and the kit comes complete with hardware, urethane bushings, inner sleeves and install instructions.
    * The 87500H tubular Heim upper control arms maintain all the same benefits of the original TC UCA’s with added caster built into their design.
    * 87500H Upper Control Arms (UCA’s) are built with Heim pivots that allow more adjust-ability that is sometimes required when multiple lifts have been installed
    * The Total Chaos 87500H UCA’s are shipped pre set at factory specs. Only qualified technicians should adjust these parts.

The Total Chaos 80501H Upper Control Arms are designed to work on the 2007+ Toyota Tundra pickup with 4 Wheel Drive.

The Direct feedback that Total Chaos has received from its customers has lead to the development of the new Upper Control Arms supplied with Heim pivots. Total Chaos customers said that when they combine aftermarket drop down bracket systems with aftermarket coil over shock upgrades and spacer lift kits say it is nearly impossible to retain the factory alignment with direct replacements. This leads to uneven tire wear and results in poor on and off road handling. These heim pivot upper control arms provide additional camber adjust-ability sometimes needed to retain the factory alignment specs.

TOTAL CHAOS 87500H | Upper Control Arms | 2007 Toyota Tundra