TOTAL CHAOS 91500 | Upper Control Arm | Nissan

KLM Performance is proud to offer the fine products produced by Total Chaos Fabrication.

The TOTAL CHAOS 91500 Upper Control Arm is for the following vehicles:

    * 2005 + Nissan Frontier
    * 2005 + Nissan Xterra
    * 2005 + Nissan Pathfinder
    * 2009 + Suzuki Equator

Total Chaos Fabrication pioneered the first bolt on Upper Control Arm system for the 05+ Frontier, XTerra & Pathfinder.

The Total Chaos 91500 replacement upper control arm eliminates the factory ball joint and incorporates a 1" Teflon lined uniball for maximum travel.

Design Features of the Total Chaos 91500 Replacement Upper Control Arms:

    * This Total Chaos 91500 system is a 100% bolt on replacement Upper Control Arm kit.
    * The 91500 kit includes stock length replacement control arms that are manufactured using 4130 chromoly tubing.
    * TC tubular arms come powder coated silver with an additional clear coat.
    * The 91500 are built using a 1" Teflon lined uniball for maximum travel that eliminates the factory ball joint.
    * The kit comes complete with 1" uniball hi-misalignment spacers, urethane bushings, inner sleeves, droop stop pads and grade 8 hardware.
    * The Total Chaos Upper Control Arms incorporate a urethane droop stop pad which contacts the coil bucket during droop travel.
    * The Total Chaos 91500 replacement UCA's also added caster in their design which will increase handling on and off road.
    * Total Chaos 91500 tubular arms come powder coated silver with an additional clear coat.
    * The Total Chaos 91500 Replacement UCA will allow for additional wheel travel with some aftermarket applications.
    * With the Total Chaos 91500 installed you can reduce alignment errors and retain factory specifications.

The Total Chaos 91500 replacement Upper control arms allow added caster in their design which will increase handling on and off road.The ability to provide additional caster also helps retain factory alignment specs when these aftermarket lifts are installed. We highly recommend adding lower control arm alignment cams (PT# 91350) on vehicle models that are not equipped with these adjusters from the factory in order to maintain alignment specs.

The Factory upper control arms contact the coil bucket during droop wheel travel. This contact is even more noticeable when aftermarket coil spacer, lift kits or coil-over shocks have been installed.

Total Chaos has incorporated many design improvements in there 91500 replacement Upper Control Arms.

The 91500 arms can be installed on any Frontier, XTerra, or Pathfinder that retains the factory control arm and spindle mounting locations. All pivot tubes include zerk fittings to lubricate the urethane bushings and inner sleeves while the arms are bolted on the vehicle. TC fixed pivot & urethane bushing design will eliminate potential alignment hassles that can be a result from adjustable pivot alternatives.

All Total Chaos Fabrication products are proudly made in the USA.

TOTAL CHAOS 91500 | Upper Control Arm | Nissan